Free Access
Volume 85, Number 4-5, July-October 2005
2nd International Symposium on Spray Drying of Milk Products
Page(s) 335 - 342
Published online 21 June 2005
References of Lait 85 335-342
  1. Bastani F.B., Ramamoorthy C.V., Fault tolerant distributed process-control systems, in: Szygenda S. (Ed.), Proceedings of the 1987 Fall Joint Computer Conference on Exploring Technology: Today and Tomorrow (Dallas, Texas, USA), IEEE Computer Society Press, Los Alamos, CA, USA, 1987, pp.522-527.
  2. Blevins T.L., McMillan G.K., Wojsznis W.K., Brown M.W., Advanced Control Unleashed: Plant Performance Management for Optimum Benefit, ISA, North Carolina, USA, 2003.
  3. Boonyai P., Bhandari B., Howes T., Stickiness measurement techniques for food powders: a review, Powder Technol. 145 (2004) 34-36.
  4. Chen L., Hontoir Y., Huang D., Zhang J., Morris A.J., Combining first principles with black-box techniques for reaction systems, Control Eng. Practice, 12 (2004) 819-826.
  5. Chuy L.E., Labuza T.P., Caking and stickiness of dairy-based food powders as related to glass transition, J. Food Sci. 59 (1994) 43-46.
  6. Courtois F., Automatic control of drying processes, in: Mittal G.S. (Ed.), Computerized Control Systems in the Food Industry, Marcel Dekker, New York, USA, 1997, pp. 295-316.
  7. Davidson V.J., Fuzzy control for food processes, in: Mittal G.S. (Ed.), Computerized Control Systems in the Food Industry, Marcel Dekker, New York, USA, 1997, pp. 179-205.
  8. Farid M., A new approach to modelling of single droplet drying, Chem. Eng. Sci. 58 (2003) 2985-2993.
  9. Harvie D.J.E., Langrish T.A.G., Fletcher D.F., A computational fluid dynamics study of a tall form spray dryer, Trans. IChem E. 80, Part C (2002) 163-175.
  10. Hennigs C., Kockel T.K., Langrish T.A.G., New measurements of the sticky behavior of skim milk powder, Drying Technol. 19 (2001) 471-484 [CrossRef].
  11. Henson M.A., Nonlinear model predictive control: current status and future directions, Comput. Chem. Eng. 23 (1998) 187-202 [CrossRef].
  12. Hergeth W., Jaeckle C., Krell M., Industrial process monitoring of polymerization and spray drying processes, Polymer Reaction Eng. 11 (2003) 663-714.
  13. Integrated Manufacturing Technology Initiative, Intelligent Controls for Continuous Processing, IMTI Inc., Oak Ridge, Tennessee, USA, 1999.
  14. Jumah R.Y., Mujumdar A.S., Control of industrial dryers, in: Mujumdar A.S. (Ed.), Handbook of Industrial Drying, 2nd edn., Marcel Dekker, New York, USA, 1995, pp.1343-1368.
  15. Kaufmann S.F.M., Feigl K., Fischer P., Windhab E.J., Investigation and visualization of droplet deformation and breakup in complex laminar flow fields, in: Bimbenet J.J. (Ed.), Proceedings of 9th International Congress of Engineering and Food, Montpellier, France, 7-11 March 2004, on CD-ROM, Société de Chimie Industrielle, Paris, France, 2004.
  16. Kudra T., Sticky region in drying-definition and identification, Drying Technol. 21 (2003) 1457-1469 [CrossRef].
  17. Ljung L., System Identification: Theory for the User, Prentice-Hall, Englewood Cliffs, NJ, USA, 1999.
  18. Nikolaou M., Misra P., Linear Control of Nonlinear processes: Recent developments and future directions, Comput. Chem. Eng. 27 (2003) 1043-1059 [CrossRef].
  19. Ozmen L., Langrish T.A.G., An experimental investigation of the wall deposition of milk powder in a pilot-scale spray dryer, Drying Technol. 21 (2003), 1253-1272.
  20. Perez-Correa J.R., Fariás F. Modelling and control of a spray dryer: a simulation study, Food Control 6 (1995) 219-227 [CrossRef].
  21. Pisecky J., Technology of skimmed milk drying, J. Soc. Dairy Technol. 34 (1981) 57-62.
  22. Pisecky J., Handbook of Milk Powder Manufacture, NIRO A/S, Copenhagen, Denmark, 1997.
  23. Richalet J.A., Rault A., Testud J.D., Papon J., Model predictive heuristic control: applications to industrial processes, Automatica 14 (1978) 413-428 [CrossRef].
  24. Roos Y.H., Importance of glass transition and water activity to spray drying and stability of dairy powders, Lait 82 (2002) 475-484 [EDP Sciences] [CrossRef].
  25. Santillan Marcus E.A., Tarzia D.A., Exact solutions for drying with coupled phase-change in a porous medium with a heat flux condition on the surface, Comput. Appl. Math. 22 (2003) 293-311 [MathSciNet].
  26. Schuck P., Spray drying of dairy products: state of the art, Lait 82 (2002) 375-382 [EDP Sciences] [CrossRef].
  27. Soroush M., State and parameter estimations and their applications in process control, Comput. Chem. Eng. 23 (1998) 229-245 [CrossRef].
  28. Straatsma J., van Houwelingen G., Meulman A.P., Steenbergen A.E., Dryspec2: a computer model of a two-stage dryer, J. Soc. Dairy Technol. 44 (1991) 107-111.
  29. Straatsma J., van Houwelingen G., Steenbergen A.E., de Jong P., Spray drying of food products: 1. Simulation model, J. Food Eng. 42 (1999) 67-72 [CrossRef].
  30. Straatsma J., van Houwelingen G., Steenbergen A.E., de Jong P., Spray drying of food products: 2. Prediction of insolubility index, J. Food Eng. 42 (1999) 73-77 [CrossRef].
  31. Tetra Pak Processing Systems, Dairy Processing Handbook, Tetra Pak Processing Systems AB, Lund, Sweden, 1995.
  32. Trystram G., Courtois F., Food process modeling and simulation, in: Mittal G.S. (Ed.), Computerized Control Systems in the Food Industry, Marcel Dekker, New York, USA, 1997, pp. 55-85.
  33. van Boxtel A.J.B., Alderlieste P.J., Steenbergen A.E., Control of the moisture content of milk powder by the Fralcomp method, in: Renard M., Bimbenet J.J. (Eds.), Automatic Control and Optimisation of Food Processes, Elsevier Applied Science, New York, USA, 1988, pp. 252-263.
  34. Verdurmen R.E.M., Straatsma H., Verschueren M., van Haren J.J., Smit E., Bargeman G., de Jong P., Modelling spray drying processes for dairy products, Lait 82 (2002) 453-463 [EDP Sciences] [CrossRef].
  35. Westergaard V., Milk Powder Technology. Evaporation and Spray Drying, NIRO A/S, Copenhagen, Denmark, 1994.